Assembling Your Fountain - Giles & Posner CHOCOLATE FOUNTAIN User Manual

Introducing your Fountain
Thank you for choosing a Table Fountain from Giles & Posner.
This short Guide is here to help you enjoy a great new eating and
entertaining experience, to inspire you with delicious dipping
ideas and to show you how easy it is to care for your Fountain.
To start, here's what you'll find in the box and how they fit
together.
Base unit containing heater and motor
Triangular point where
spiral drive fits
Bowl
First things first:

Assembling your Fountain

Your Fountain is easy to assemble.
After unpacking for the first time, wipe out the bowl with a damp paper towel or cloth.
Rinse the tier system and spiral drive in warm water and dry.
Fit the spiral drive to the triangular point in the centre of the bowl. Make sure it's firmly
locked in position.
Assemble the tier system by taking the central column and slipping first the middle tier and
then the top tier over it. Complete by adding the top hat. Then slip the complete system
over the spiral drive and lock it in position on the three round pins in the bowl.
1
Round pins for locking
the tier system
HEAT
HEAT/
OFF
FLOW
Operating dial with
Off/Heat/Heat & Flow
settings
Adjustable feet
Spiral drive Tier system (in 4 parts)
Centre column
Top tier
Top hat
Middle tier