Jobsite V-12/AWE Installation & User Manual

For precise volume adjustment in all weather conditions 12-step all weather enclosed volume control
Hide thumbs Also See for V-12/AWE:

Advertisement

Quick Links

INSTALLATION & USER GUIDE
For Precise Volume
Adjustment in All
Weather Conditions
V-12/AWE
12-STEP ALL WEATHER ENCLOSED VOLUME CONTROL

Advertisement

Table of Contents
loading

Summary of Contents for Jobsite V-12/AWE

  • Page 1 INSTALLATION & USER GUIDE For Precise Volume Adjustment in All Weather Conditions V-12/AWE 12-STEP ALL WEATHER ENCLOSED VOLUME CONTROL...
  • Page 2: Table Of Contents

    V-12/AWE 12-STEP ALL WEATHER ENCLOSED VOLUME CONTROL TABLE OF CONTENTS Features...1 Product Overview...2 Package Contents ...3 Preparing for Installation...3 Installation...4 Operation...6 Specifications ...7 Warranty...8...
  • Page 3: Features

    FEATURES Includes PVC weatherproof housing and stainless steel hardware Safely connect up to eight speaker pairs to a single amplifier or receiver UL listed to comply with local building codes Stylish indicator knob 12-step make before break volume control switch design...
  • Page 4: Product Overview

    PRODUCT OVERVIEW V-12/AWE Figure 1 (a) Knob (b) Faceplate (c) Gasket (d) Volume Control (e) Enclosure...
  • Page 5: Package Contents

    Figure 2 PREPARING FOR INSTALLATION Consider the most convenient location to mount the V-12/AWE. Use the PVC junction box (supplied), mounted atop a PVC conduit through which the wires will run. Count the number of pairs of 4 ohm speakers and the number of pairs of 8 ohm speakers you are connecting.
  • Page 6: Installation

    No2 Phillips screwdriver Wire stripper Wire labels INSTALLATION 1. Identify the Speaker wire and Amplifier wire. Label the wires for future reference. 2. Run the necessary wiring up through the conduit and the opening at the base of the enclosure.
  • Page 7: Installation Diagram

    7. Insert each wire into the appropriate hole and snap down the locking tabs. 8. Insert the smooth side of the connector plug into the smooth side of the V-12/AWE socket. 9. Install the V-12/AWE into the all-weather enclosure. 10. Set the Impedance Magnification Switch as determined by the impedance charts.
  • Page 8: Operation

    3. If you are using a JobSite speaker-selection system, locate the on/off button that corresponds to the speaker pair you wish to play. Set it to the ON position. Make sure the defeatable protection circuit is not enabled. See Using Speaker Selectors with IM Volume Controls, on page 5.
  • Page 9: Specifications

    1x, 2x, 4x, 8x settings Total attenuation: 54dB maximum Wiring requirements: 2 individual runs of 2-conductor 14-18-gauge speaker wire or 1 run of 4 conductor Mounting: Surface mount PVC single gang enclosure (included), mounts on 3/4" PVC conduit Dimensions: 3" wide x 4-13/16" high x 3-3/8" deep Depth behind faceplate: 2-9/16"...
  • Page 10: Warranty

    LIMITED WARRANTY JobSite Systems (“JOBSITE”), a Niles Audio Corporation company, warrants its passive products (those not requiring AC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.
  • Page 11 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For the name of the nearest authorized JOBSITE wholesale distributor, contact: JobSite Systems 12331 S.W. 130 Street, Miami, Florida 33186 WWW.JOBSITESYSTEMS.COM...
  • Page 12 WWW.JOBSITESYSTEMS.COM © 2004 JobSite Systems. All rights reserved. JobSite, Pure Custom and Niles are registered trademarks of Niles Audio Corporation and the JobSite Logo is a trademark of Niles Audio Corporation. All other trademarks are the property of their respective owners. Some JobSite products (or components thereof) are manufactured under one or more U.S.

Table of Contents