Changing Com Port Number - ST-Lab U-400 User Manual

Changing COM Port Number

Some serial devices need a special COM port in order to work. If your
serial device works properly, do not change this setting.
1. From the Device Manager window double click Ports(COM &
LPT), then double click the High-Speed USB Serial Port or
MosChip High-Speed USB Serial Port you want to change.
2. Click Features tab.
3. Click the down arrow that is next to the COM Port Number box,
select a COM port that is not in use, then click OK to save the
changes.
Mar/07
6
MN3000000032