For Windows® Vista - ST-Lab U-400 User Manual

9. Windows will bring up the "Found New Hardware Wizard"
window, select "Install the software automatically" and click on
"Next" to proceed.
10. A warning message will popup informing the user that the
software being used has not passed the Windows Logo testing,
click "Continue Anyway".
11. Click "Finish" to complete found new hardware wizard.
12. Repeat steps 9-11 four more times.
13. Open "Device Manager" under System Properties.
14. Click on the + (plus sign) in front of the "Ports (COM&LPT)",
two "High-Speed USB Serial Port..." should be displayed.
15. Double click "Universal Serial Bus controllers", "High-Speed
USB MultiSerial Compound Device" should be displayed.
For Windows® Vista
1. Don't plug in the USB 4-Port Serial Adapter to the USB
connector of your computer.
2. Please insert the CD driver bound with USB 4-Port Serial Adapter
into your CD-ROM Drive.
3. At the Windows desktop click Start, then Run.
4. Type D:\MCS7840\Vista32\MSSetup.exe, then click OK.
Mar/07
4
MN3000000032