Download  Print this page

Philips Dynalite DLE220-S Installation Manual

2 x 20a leading edge dimmer.
Hide thumbs
   

Advertisement

DLE220-S
2 x 20A Leading Edge Dimmer
Installation Manual
Features..................................................... 2
Important Safeguards................................... 2
Internal View............................................... 3
Mounting.................................................... 4
Supply & Load Cable Connections................... 5
Connecting Serial Control Cables.................... 6
WMGD Pty Limited trading as Dynalite
Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia
t +61 8338 9899
f +61 2 8338 9333
Contents
Troubleshooting................................................7
Specification.....................................................8
dynalite.info@philips.com
ABN 33 097 246 921 philips.com/dynalite

Advertisement

   Related Manuals for Philips Dynalite DLE220-S

   Summary of Contents for Philips Dynalite DLE220-S

  • Page 1: Table Of Contents

    Connecting Serial Control Cables……………….. 6 Hardware Controls & Analogue Inputs….………..7 WMGD Pty Limited trading as Dynalite Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia t +61 8338 9899 f +61 2 8338 9333 dynalite.info@philips.com ABN 33 097 246 921 philips.com/dynalite...

  • Page 2: Features

    300mm. If anticipated cable runs are over 600 metres for serial cables, consult your dealer for advice. Do not cut or terminate live data cables. DLE220-S Instruction Manual Rev F.doc...

  • Page 3: Internal View

    For spare parts, please call your nearest Dynalite Customer Service Centre, and specify DLE220-S DLE220-S Instruction Manual Rev F.doc...

  • Page 4: Mounting

    The DLE220-S should be mounted vertically, the right way up. The DLE220-S requires an air gap of 100mm on each side and at the top and bottom of the device. This air gap is...

  • Page 5: Supply & Load Cable Connections

    100% output. If there is no output on any or all channels, see the Troubleshooting section (page 7). The device should be de-energised before terminating the control and data cables. DLE220-S Instruction Manual Rev F.doc...

  • Page 6: Connecting Serial Control Cables

    30mm. A data cable that is connected to an energised dimmer is live. Do not cut or terminate live data cables. If the data cable has to cross over any mains cables, it should do so at a 90° angle. DLE220-S Instruction Manual Rev F.doc...

  • Page 7: Hardware Controls & Analogue Inputs

    3 pushes = All Channels 100% Push & hold for 4 sec = Reboot Accessory Module Socket - Accepts plug in modules for optional features such as DMX512 ports. Consult your distributor for details on the available accessory modules. DLE220-S Instruction Manual Rev F.doc...

  • Page 8: Troubleshooting

    Dynalite Intelligent Light Pty Ltd. Not to be reproduced without permission. Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333 E-mail: dynalite.info@philips.com Web: Philips.com/dynalite DLE220-S Instruction Manual Rev F.doc...

Comments to this Manuals

Symbols: 0
Latest comments: