Remote Control; Remote & Device Settings - TiVo Media Device Manual

5 Settings
Due to the great variety of TVs and
A/V receivers available, some makes
and models may not be compatible with
your TiVo ®

remote control.

If you're unable to program the TiVo remote
to work with your equipment, go to
www.mytivo.com.au/support (Australia) or
www.mytivo.co.nz/support (New Zealand)
for help.
70
Remote & Device Settings
From the TiVo Central screen, select Messages & Settings, then Settings, then Remote &
™
Device Settings.
Remote Control
Programmable Buttons
Some buttons on the TiVo remote are programmable. To program the buttons:
®
1. Follow the instructions on the Remote Control Setup screen. You have options to control
power, volume and mute on your TV, volume and mute on your A/V receiver (stereo
system), and input selection on your TV.
2. Press and hold the buttons indicated on the screen for about 5 seconds—until the red light at
the end of the remote lights up and stays on.
3. Try entering the first code listed on the screen. The red light on the remote flashes to indicate
it received the code. Test the button. If it doesn't work, repeat the steps using the next code
on the list.
Network Remote Control
• The network remote control feature allows your TiVo Media Device to be integrated with
home-automation and entertainment control devices on your network. If your home is
equipped with touch panel remotes, network-connected mobile phones, or other network
based remote control devices, select Enabled to turn this function on.