Getting Started; Radio On-Off/Volume Control; Radio Operation; Sending A Call - Motorola GP680 User Manual

GETTING STARTED

Radio On-Off/Volume Control

To turn the radio on, turn the On-Off/Volume Control
knob clockwise. To turn the radio off, turn the
On-Off/Volume Control knob counterclockwise until
you hear a click.

Radio Operation

When the self test is complete the radio will display:
Freetext
After this text has been displayed, the radio will scan
for system access with the LED on the top of the
radio flashing GREEN and the scanning icon G
lit.
When a system is acquired, the green LED will go
off and the scanning icon Gwill be replaced by the
registered icon L and display will show:
Idle Freetext
Making a Call
Before you can make a call the radio must be in the
IDLE STATE, as displayed above, i.e. a personality
has been selected and no call is in progress.
The radio is capable of making a variety of calls,
including calls to individual radios, groups of radios
and calls to private and public telephone systems.
Please contact your dealer for further information.

Receiving a Call

There are two types of systems on which the radio
may be used, Off Air Call Set Up (OACSU) and Full Off
Air Call Set Up (FOACSU). If you are in doubt about
which system you are operating on, please consult
your dealer.
Receiving a call on an OACSU system -
When the radio is called tone D will sound and the
LED and display flashes. This will then be followed
by tone B.
Receiving a call on an FOACSU system -
When the radio is called, a ringing tone will sound
and the LED and display flashes.
Press either the PTT or # key to accept the call.
Tone D will sound until a speech channel is
allocated, then tone B sounds.
Note:The system may have a limited call time and
the call may be terminated automatically if this
call time is exceeded.
English
11