Table of Contents
Advertisement
Bluetooth device to which your Blue Eagle II is paired.
CHARGING THE HEADSET
Before first operation, attach the Blue Eagle II headset to either the AC
or DC power charger and allow the unit to charge undisturbed for 4 full
hours.
To charge the headset using an electrical outlet, select the AC adapter. To
charge the headset using your vehicle's auxiliary power outlet, select the
mobile power DC adapter.
1. Plug the power cord into the headset charging port, then plug the
AC adapter into an electrical outlet or plug the DC mobile adapter
into your vehicle's auxiliary power outlet.
2. An amber indicator light will illuminate on the headset when the
Blue Eagle II is charging.
3. Charge Blue Eagle II headset 4 hours before first use. After this,
each additional hour of charge time will yield approximately
5 hours of talk time (Up to 14 hours Talk Time total). When the
headset is fully charged the amber indicator light on the headset
will turn off.
It is not necessary to wait for the light to turn off before using the
headset. Remove headset from the power adapter when you wish
to stop charging the headset.
Low Battery Indicator
When the headset battery is at the end of its charge, you will hear tones
or beeps in the headset and the amber indicator light flash constantly.
Switch immediately to your phone to continue your conversation. If the
headset loses power before you switch over, you will not lose the call.
Activate your handset to resume your conversation. Turn off the Blue
Eagle II and attach it to the power adapter to recharge.
Talk Time and Standby Time
After the headset is fully charged, you will enjoy a total talk time of up to
14 hours and a standby time of up to 480 hours.
Advertisement
Table of Contents
