Samsung 4 series User Manual page 7

3 Fm ant
Connect to the FM radio antenna.
Do not connect an RF antenna to Fm ant terminal
4 PC In
- Connect to the video output jack on your PC.
5 eX-lInK
- Connector for service only.
6 ant In
To view television channels correctly, a signal must be received by the set from one of the following
sources:
- An outdoor aerial / A cable television network / A satellite network
7 aV In [VIDeo] / [r-auDIo-l]
- Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to [r-auDIo-l] on your set and the other ends to corresponding audio
out connectors on the A/V device.
8 heaDPhoneS
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
9 ComPonent In 1, 
- Connect component video cables (optional) to component connector ("P
your set and the other ends to corresponding component video out connectors on the DVD.
- If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the
DVD and connect the DVD to component connector ("P
- The P , P and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and
R B
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio out connectors on the DVD.
0 Kensington lock (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the kensington Lock may be different depending on its model.
", "P ", "Y") on your set.
R B
english - 
", "P ", "Y") on the rear of
R B