Manual Time Setting - Instant Transmission WIRELESS 868 MHz Instruction Manual

In area where reception of the radio-controlled time (DCF time) is not possible, the time reception function
can be turned OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1. The digit "ON" digit will start flashing on the LCD.
2. Use the + key to turn OFF the time reception function if necessary.
3. Confirm with the SET key and enter the Manual time setting.
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any reception of
the radio-controlled time (DCF time) as long as the Time Reception OFF function is activated. The
Time Reception icon and the DCF icon will not be displayed on the LCD.

MANUAL TIME SETTING:

In case the Weather station is not able to detect the radio-controlled time (DCF time) signal (disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz
clock.
Hours (flashing)
41
Minutes (flashing)