Inter-m AOE-212N Operation Manual page 17

- Serial Setup(422)
Content
Setting Setup the property of serial communication (RS-422) port.
Baud rate Setup the communication speed of serial port. Scope is 2400bps~115200bps.
Connection Connection setup to transmit the serial communication.
Port Default port value to transmit the serial communication.
IP address Setup the IP address to receive the serial communication
Run Select ' Run'
Serial Service Setup to transmit the serial communication to an other AOE-212N.
Sets ' Run' to begin serial communications transmission. The equipment list of
Run equipment being sent to the serial communication serial server run-time will be
displayed.
Apply and save the changed contents by using the
Set
Clear Restore all setups to default values by using
Default
to begin serial communication receiving.
button after changing the setup of SET device.
UDIO OVER ETHERNET
9600
5456
192.168.1.99
button.
OE-212N
Value
15