Table of Contents
Advertisement
UDIO OVER ETHERNET
3.3 client setting
Configure the Client (the receiving side) OE-212N devices using the Web browser.
※ Caution : If connecting the OE-212N for the first time, please change the default IP address to
avoid duplication with other equipments, re-connect with modified IP address on web-browser.
- Select ( udio set up) on the left side menu of the (system set up)
- Set main-server and sub-server values on the ' udio Client' section as shown in the picture below with
the values that you noted previously from 3.2 when configuring the Main and secondary servers.
Main
Redundant Server
OE-212N
Advertisement
Table of Contents
