Installing The Software; Installing The Driver And Editor Software In Windows Xp; Zero4/Zero8 Application Installer - Korg Zero8 Owner's Manual

Installing the software

Install the KORG FireWire Audio/MIDI driver and ZERO Edit software
from the included CD-ROM into the computer to which you'll be connect-
ing the ZERO8.
Contents of the CD-ROM
The included CD-ROM contains the following.
• ZERO Edit
• KORG FireWire Audio/MIDI driver
• ZERO Edit owner's manual (PDF)
• Software license agreement (RTF)
• MIDI implementation chart (PDF)
• MIDI implementation
Please note before use
— Copyright to all software included with this product is the property of Korg
Corporation.
— The license agreement for the software included with this product is provided
separately. You must read this license agreement before you install the software.
Your installing the software will be taken to indicate your acceptance of this license
agreement.
Operating requirements
Windows XP
Operating system: Microsoft Windows XP Home Edition / Profes-
sional Service Pack 2 or later
Computer: FireWire port is required
CPU: Pentium3 800 MHz or faster
Memory: 256 MB or more
Mac OS X
Operating system: Mac OS X 10.3.9 or later
Computer: FireWire port is required
CPU: PowerPC G3 800 MHz, PowerPC G4 733 MHz or better, or an
Intel processor
Memory: 256 MB or more
1. Installing the driver and editor
software in Windows XP
Note: You must have Administrator privileges in order to install
or uninstall software in Windows XP. For details, please con-
sult with your system administrator.
Note: You must use the ZERO4/ZERO8 application installer to in-
stall the KORG FireWire Audio/MIDI driver before you con-
nect the ZERO8 to your computer via FireWire.

ZERO4/ZERO8 application installer

The ZERO4/ZERO8 application installer will automatically install the
KORG FireWire Audio/MIDI driver and the ZERO Edit software into your
computer.
1. Insert the included CD-ROM into the CD-ROM drive of
your computer.
Normally, the "ZERO4/ZERO8 Application Installer" will start up au-
tomatically.
If, due to settings on your computer, the installer does not start up au-
tomatically, double-click "KorgSetup.exe" on the CD-ROM.
2. Following the instructions that appear in the screen,
install the KORG FireWire Audio/MIDI driver and the
ZERO Edit software.
Note: You must install the KORG FireWire Audio/MIDI driver if
you want to use ZERO Edit via the FireWire port.
3. When all of the selected software has been installed, exit
the installer.
For details on the installation procedure, refer to the following section
"Installing the KORG FireWire Audio/MIDI driver."
27