Delicate Course; Reserve Program (9 Hours) - Panasonic NA-F70B1 Operating Instructions Manual

DELICATE Course

Suitable for washing soft laundry.
Remark: Amount of laundry that can be washed at one time : 3.0 kg
1
Press the [POWER ON] button and put in the laundry.
2 Press the [PROGRAM] button twice for
"DELICATE" Course.
3 Press the [START/HOLD] button.
4 Put in the appropriate amount of
detergent for the water level.
Then close the lid.
7 Add softener. See page 7 for details.
The buzzer lets you know when the washing is finished.

RESERVE Program (9 hours)

The washing cycle will be fi nished approximately 9 hours from the current time (Sometimes
the operation time may exceed the reserve time caused by the water feeding and draining
condition). Programming timer [RESERVE] only can be used with [NORMAL] and [SPEEDY]
course.
1
Press the [POWER ON] button and put in the laundry.
2 Press the [PROGRAM] button three
times for "NORMAL RESERVE" course.
Press the [PROGRAM] button four times
for "SPEEDY RESERVE" course.
3 Press the [START/HOLD] button.
4 Put in the appropriate amount of
detergent according to the water level.
Then close the lid.
7 Add softener. See page 7 for details.
Washing cycle will be finished after 9 hours.
NA-F62-70B1-ENABPS.indd 11 NA-F62-70B1-ENABPS.indd 11
• The light will indicate "DELICATE'' Course
automatically.
• Water level will be indicated 41L (35L in the case
of NA-F62B1). It can be adjusted to 30L only.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds
other than 40 grams, add the amount of
detergent recommended by the detergent
makers for the selected water level. See page 6
for details.
• The "RESERVE" and "NORMAL" light will be
indicated.
• The machine will measure the load size without
water (laundry sensing).
«
• The water level will be indicated automatically.
• The water level indication (recommended
detergent amount) will go off 2 minutes after
starting the program, but only indicate the
[RESERVE]. So, check the water level for
recommended detergent amount before the
indication goes off.
• Change the Reserve program. Press the [POWER
OFF] button and start from step 1 again.
• Cancel the Reserve program. Press the [POWER
OFF] button.
• Check the contents of the Reserve program. Keep
pressing [PROGRAM] button.
1
3
2
1
3
2
11
5/8/08 9:16:36 AM 5/8/08 9:16:36 AM