Scsi Id Setting; Figure 3.3 Sound Scsi Id Set Switch Position; Table 3.1 Sound Scsi Id Settings - Sega Saturn sound box User Manual

SCSI ID Setting

When a host machine (PC/AT, Mac, etc.) is connected to the SCSI, the SCSI ID
must be set. The SCSI ID can use the numbers 1 through 6. The ID is changed
by the switch on the sound board to a setting not used by another SCSI device,
such as a hard disk drive, already connected. The switch is set to an ID of 6 at
the time of shipment. To change switches, first remove the Sound Box cover,
then make the desired setting.
MIDI CONNECTOR

Figure 3.3 Sound SCSI ID set Switch Position

Table 3.1 Sound SCSI ID Settings

Switch No.
ID No.
0
1
2
3
4
5
6
7
Note: Settings at the time of shipment are shown within the double lines
(RDJ, 9/27/94)
ID SETTING SWITCH
SOUND BOARD
ON
SW2
OFF
1 2 3
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON ON OFF
OFF OFF ON
ON OFF ON
OFF ON ON
ON ON ON
1 2 3 4 5 6 7 8
4 5 6
OFF OFF OFF
ST-193-091394
Sega Enterprises, Ltd.
SCSI CONNECTOR
7 8
OFF OFF
13