Power On/Off; Connecting The Ac Cable; Power On; Power Off - Sega Saturn sound box User Manual

2 . 3 Power On / OFF

Connecting the AC Cable

Observe the following items when connecting the AC cable.
1) Turn off the Sound Box power switch.
2) Plug the female side (end) of the AC cable into the Sound Box AC inlet.
3) Plug the AC grounded cable plug into an AC outlet.
Sound Box Input Specification are:
• AC85 V ~ 132 V
• 47 Hz ~ 63 Hz
• Maximum power consumption: 50 W

Power ON

1) Turn on the power by turning the Sound Box power switch to ON.
The power switch is a light which flashes whenever the power is
turned on.
2) This turns on the power of the host (such as a Mac) as well as peripheral
devices connected to the sound box.
If the light does not flash, turn off the power, recheck the connections of the AC cable
N o t e :
as well as other cables, then turn the power on again. If it still does not flash contact a
Support Centers.

Power OFF

Following the steps above in the reverse order shuts off the power.
(RDJ, 9/27/94)
ST-193-091394
Sega Enterprises, Ltd.
8