California Trimmer RL205 Operator's Manual page 3

Assembly & Set-up (continued)
4. Attach the cable clips to secure the throttle cable to
the upper and lower handles. Note: some units may
require 1 or 2 cable clips depending on the cable
length.
5. Pivot the throttle lever to the far left and tighten screw
that secures the inner wire.
6. Attach the throttle cable wire to the engine's throttle
control bracket as shown.
Honda GC160 & GS160 Engines
NOTE: Before tightening the cable holder, push
the cable so that the throttle control activates
(pushes in) the stop switch.
Evergreen Turf Equipment, LLC • 1028 4
REEL MOWER OPERATOR'S MANUAL
Honda GX120 & GX160 Engines (Note: the air filter
must be removed to gain access to the
connection area)
NOTE: Before tightening the cable holder, push
the cable so the throttle control is in the slow
position as indicated on the engine.
7. Mount the grass catcher bail to the grass catcher.
Attach the bail ends to the grass catcher using the flat
washers and clevis pins provided
Note: The bail has slightly different lengths on
each side, so align with the engine hook to
determine the proper position. The grass catcher
bin has three sets of mounting holes for the bail
so an adjustment can be made according to the
expected load or weight.
The bottom of the
grass catcher has
2 brackets
designed to rest
on the caster
bracket.
th
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com