Removing And Fitting The Blade And Fan; Caring For Lawnmower; Caring For Your Lawnmower - Flymo EASI GLIDE 300 Original Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Switch off and remove the plug from the mains.

Removing the Blade and Fan. USE GLOVES.

1. To remove the blade bolt, hold the fan firmly and with

the spanner provided loosen the blade bolt by turning it

anti-clockwise (L).

2. Remove the blade bolt, blade, spacers and fan.(M)

3. Inspect for damage and clean as necessary.

• Renew your metal blade after 50 hours mowing or 2

years whichever is the sooner - regardless of condition.

If the blade is cracked or damaged replace it with a new

one. Never use a blade bolt if the insulated head is

damaged cracked or missing.

Fitting the Blade and Fan. USE GLOVES.

1. Ensure the fan (M4) is located correctly.

2. Place the spacers (M3) onto the fan ensuring the pegs

have located into the holes.

3. Place the blade (M2) onto the spacers ensuring the text

'GRASS SIDE' (M5) will be facing the grass when the

product is in the mowing position. Ensure the pegs

have located into the holes on the blade and that the

blade is positioned as illustrated in Figure M

4. Place the blade bolt (M1) through the centre hole of the blade.

5. Tighten down clockwise by hand.

6. Hold the fan firmly and tighten the blade bolt with the

spanner provided.

Cleaning

• IMPORTANT: It is very important that you keep your

lawnmower clean. Grass clippings left in any of the air

intakes or under the deck could become a potential fire

hazard.

• USE GLOVES

Switch off and remove the plug from the mains before

cleaning.

It is recommended that you clean your lawnmower

straight after mowing while the grass is still wet.

1. Remove grass from under the deck with the span-

ner/scraper tool. (N)

2. Using a soft brush - remove grass clippings from all air

intakes, the grassbox and the grassbox vision window.

(P & Q)

3. Clean the impeller inlet with a soft brush. (R)

4. If jammed lever the roller out of position and clean with

a soft brush.(S).

5. Wipe over the surface of your lawnmower with a dry

cloth. (T)

• IMPORTANT: Never use water for cleaning your lawn-

mower. Do not clean with chemicals, including petrol,

or solvents - some can destroy critical plastic parts.