Advertisement
Revo Burst™
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select "No" and
press Enter.
LED -
With this function you can have the LED display turn
off after 10 seconds.
1. Tap the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at all
times, or "OFF" to switch to have the LED display switch off after
10 seconds.
3. Press ENTER to confirm.
DISP
- This will "flip" the LED display 180º.
1. Tap the MENU button until "dISP" is displayed, press ENTER.
2. Either "dISP" or "dSIP" will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
TEST
- This function will run a self test program.
1. Tap the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until "FHRS" is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
American DJ Supply
- www.americandj.com - Revo Burst™ User Manual Page 10
©
®
System Menu
Revo Burst™
VER
ware of the fixture.
1. Tap the MENU button until "VER" is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
1. Tap the MENU button until "RSET" is displayed, press ENTER.
2. The fixture will now reset
©
- With this function you can display the version soft-
- Use this function to reset the unit.
American DJ Supply
- www.americandj.com - Revo Burst™ User Manual Page 11
®
System Menu
Advertisement
