주PREPARATION
The S1 voltage is set to 100/117/200/230/240 depending on your local requirement. If you want to
change the voltage, please contact your local April Music retailer.
Turn off the unit if you want to change to Balanced or Unbalanced mode.
Turn off the unit when selecting the Stereo or Bridged Mono mode.
Unbalanced cable is sensitive to environmental noise and we recommend that you use shorter
length. Care must be taken when the S1 is used in bridged mono mode as its power is increased
4 times.
In general, we highly recommend balanced cable connection.
The S1 is designed to be very stable, but the unit may generate some heat after a prolonged
period of operation. Rest assure that this is normal.
S1's speaker output is designed as balanced + and -. Care should be taken not to touch the chassis
or exposed speaker connectors of touching each other.
On and Off sequence:
Power On : Preamplifier on S1 on
Power Off : S1 off Preamplifier off
Do not remove the cover unless you are a certified technician.
The S1 is designed to exacting standard by applying highly technical tuning and expert listening
test. Your warranty will be void if you tune, modify or change any part of the unit without prior
consent from the manufacture.
4
EXIMUS S1 Power Amplifier
Need help?
Do you have a question about the EXIMUS S1 and is the answer not in the manual?