Gira 1287 00 Operating Instructions Manual page 22

22
4. Go to the home station whose call button is the second
one you pressed at the door station.
Press the
until you hear a short acknowledgement tone.
✓ A long acknowledgement tone indicates successful
assignment.
5. Go to the other home stations and press the
there for 3 seconds until you hear a short
acknowledgement tone.
✓ A long acknowledgement tone indicates successful
assignment.
6. After you have assigned all the home stations, press the
"Systemprog." button on the control device to exit
programming mode.
7. Carry out a function test.
i
Maximum number of call buttons per step
Up to 20 call buttons can be temporarily stored per step. If
more than 20 call buttons are to be assigned, the first 20 call
buttons must first be pressed and then assigned to the home
stations. The remaining call buttons can then be assigned.
button on this home station for 3 seconds
button