Table of Contents
Advertisement
Section 3
Wearing Your Headset
Your headset is supplied with a universal rubber ear cushion and a swivel ear loop. Once you attach the ear loop, you
can easily switch your headset from one ear to the other.
Section 4
Power On/Off
Power On:
If you do not see the blue LED 1 flashing, then the headset is powered off. To power on the headset,
press and hold the Multi-Function Button for approximately 4 seconds until both blue LEDs flash, then
release it. (You will hear the "Power On" tones).
Power Off:
If you see the blue LED 1 flashing, then the headset is powered on. To power on the headset, press and
hold the Multi-Function Button for approximately 4 seconds until the blue LED 2 (left) flashes,
then release it. (You will hear the "Power Off" tone).
Advertisement
Table of Contents
