Download Print this page

Getting Started - Conair CD100LCSC Instruction & Styling Manual

Advertisement

SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This curling appliance is intended for household
use. Use on Alternating Current (50-60 hertz)
only.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
DUAL VOLTAGE
This curling iron will automatically adjust to the
proper voltage. Use an adapter plug with correct
configuration prior to use in outlet.

GETTING STARTED

The iron's 30 temperature settings and Instant
Heat heat up technology combine to provide
styling versatility for all hair textures. If you have
fine hair, a low temperature will provide the best
results. If you have thick, wavy or hard-to-curl
hair, keep the heat setting high. You can vary the
iron's temperature according to your particular
need!
CURLING BASICS
1. Plug the curling iron cord into any house
hold outlet (125/250V AC). Press "ON" button.
The iron will heat up very quickly. The
indicator light will stop blinking and remain
on when the iron is ready to use. To turn off,
press "OFF" button (light will go off). Never
leave your curling iron on and unattended.
2. Section damp or dry hair evenly, and comb
each section before winding. Pressing the
automatic curl release, place curling iron mid
way up the hair section, then spread hair
evenly between spoon and barrel. Release
automatic curl release to hold hair in place.
Gently slide curling iron down to hair ends.
To avoid crimped ends, make sure they are
securely wound under the spoon in the
direction of the desired curl.
Remember, always place the spoon above
the hair strand when making a curl you want
rolled under; place the spoon under the hair
strand when making a flip style.
3. Wind the hair up as far as you want it curled,
being careful not to let the iron touch the
scalp. Hold in place for 8-12 seconds
depending on the texture and length of your
hair. For tighter, bouncier curls, roll less hair.
For looser, free-flowing curls, roll more hair.
4. To remove curling iron, unwind the hair and
press the automatic curl release. To "set" the
curl, do not comb or brush hair until it
cools.

Advertisement

loading

This manual is also suitable for:

Cd102lcscCd103lcscCd101lcsc