Getting Started - Conair Unbound CR510C Instruction And Styling Manual

GETTING STARTED

• Before using, fully charge the product for maximum battery performance, and always be sure to read
all the instructions.
• Press and hold ON/OFF/MODE button for 2 seconds to turn curler on. You will hear a "beep" and the
LCD display will turn on.
Note: Press and hold the ON/OFF/MODE button for 2 seconds to turn curler off. If you forget to turn it
off, it will shut itself off automatically after 15 minutes if not used.
• Press ON/OFF/MODE button to choose Temperature, Direction and Timer; press SETTING button to
scroll through options.
Temperature: 320°F, 360°F, 400°F.
Direction: Left or Right or MIX
Timer(seconds): 6s, 8s, 10s, 12s
• Once options are selected, press START to begin heat-up.
Note: Heating symbol will blink when it is heating and will stop blinking and 2 "beeps" will sound when
it reaches your temperature setting.
The styler's three high-heat temperature settings and Instant Heat technology provide styling versatility
for all hair types. If you have fine hair, the lower temperature will produce the best results. If you have
thick, wavy or hard-to-curl hair, keep the heat setting on high. Create a variety of curls with different
combinations of heat, time, and curl direction!