Pantech TX-1000C User Manual page 47

VOICE SERVICE
Voice Recognition (VR) enables you to place calls using your voice and to record voice
memos.
 Press and hold until your mobile phone turns to Voice
Recognition mode.
If no recorded voice dial, "No entries recorded" message will be displayed.
(Refer to page 92 for how to set one up.)
 "Please say the name after the prompt tone" will be displayed and you
will hear "Name please".
 If you say a name or tag that is already in the phone book, the number
and name will be displayed and you will hear "Calling (name)."
90
VOICE RECOGNITION MODE VOICE TOOLS MENU
H VOICE MEMO
Voice Memo allows you to record a reminder message that can be up to 60 seconds.
To record a memo:
 To start Tools menu, press
 To enter a voice memo, press
 1.1. To record a voice memo, press
Instructions will be displayed and you will hear "Please record at
the tone."
1.2. To stop recording a memo, press
[PAUSE/RESUME].
1.3. Press [OPTIONS] after recording a voice memo to "Re-record",
"Review" or "Save."
1.4. Select "Save", input a "Voice Memo" title and then press
If a name is not entered, the voice memo caption will default to
"Untitled". (See page 33 for more information on entering letters,
numbers and symbols.)
2. To play voice memo, press
Select the voice memo you want to play.
Press [OPTIONS] for "Edit Caption" or "Play".
Press [ERASE] to erase the memo.
3. To play using the speaker mode, press
Select the voice memo you want to play.
Press [OPTIONS] for "Edit Caption" or "Play".
Press [ERASE]
4. To erase all voice memos, press
"Erase all voice memos?" will be displayed.
Press [YES] or [NO].
VOICE SERVICE
[MENU] .
.
.
[STOP] or
.
.
.
.
91