Inserting Memory Card - TrekStor eBook Player 7 User Manual

Inserting Memory Card

The eBook Player supports SD/SDHC/MMC card. To insert a memory card:
Open the SD cover.
Check that the SD card is in the correct position with the contact pin
facing upwards as illustrated below. You may damage the card and the
eBook Player if SD card is not inserted in correct position.
Push the SD card into the card slot until it clicks.
To remove SD card, push the SD card once again until it clicks.
When a SD card is inserted in or ejected from the eBook Player, it may
take few seconds for the eBook Player to update the content.
Please avoid inserting or ejecting SD card when other operation is
running as this may cause the system hang.
Do not remove the card if the content inside the card is being played.
This will halt the operation of the reader and cause the eBook Player to
restart.
If the system is not responding, press and hold the <Power> button for
6 seconds to reset and turn it off.
Limitations with NTFS file system:
Books on the microSD card are not recognized by ADE when connected
to PC.
Direct copy of files from internal memory to card is not supported.
Getting Started
4