Troubleshooting - Sanyo DVP-P1EX Instruction Manual

TROUBLESHOOTING

If malfunction occurs, first check the troubleshooting procedures given below.
Problem or
indication
[u] is shown on
the LCD monitor,
and the PAPER
indicator is lit or
flashing.
[u] is shown on
the LCD monitor,
and the INK RIB-
BON indicator is lit.
[u] is shown on
the LCD monitor,
the PAPER indica-
tor is lit or flashing
and the INK RIB-
BON indicator is lit.
The card image(s)
can't be read and
the MEMORY
CARD indicator is lit
red or orange.
Cause
The paper tray is empty: The
PAPER indicator is lit.
Paper jam in the printer: The
PAPER indicator flashes.
The ink ribbon is depleted.
The paper tray is empty or
there is a paper jam in the
printer, and the ink ribbon is
depleted.
More than one card is inserted
in the printer: The MEMORY
CARD indicator is lit orange.
The inserted card is defective:
The MEMORY CARD indicator
is lit red.
The SmartMedia is inserted
incorrectly: The MEMORY
CARD indication is lit red.
TROUBLESHOOTING
Solution
When the paper tray is
empty
1 Remove the paper tray and
load the paper.
2 Reinsert the loaded paper
tray in the printer.
h When the PRINT button
is pressed, printing
resumes.
1 Remove the ink ribbon.
2 Install a new ink ribbon.
h When the PRINT button
is pressed, printing
resumes.
Refer to the paragraphs above
on "[u] is shown on the
LCD monitor, and the PAPER
indicator is lit or flashing" and
"[u] is shown on the LCD
monitor, and the INK RIBBON
indicator is lit," and follow the
indicated procedures to
resolve the problems.
If two cards are inserted
1 Remove one of the cards
from the printer.
If the inserted card is defec-
tive
1 Replace the card.
If the SmartMedia is inserted
incorrectly
1 Remove the card and rein-
sert it correctly oriented.
45
English