Sanyo DVP-P1EX Instruction Manual page 45

2
Press the PRINT button.
h The PRINT indicator lights, and printing
begins.
h During printing, the remaining number of
prints (Remains) is shown.
NOTE
If the total number of prints indication does not show more than [99]...
i The indication for the total number of prints cannot show more than 99. However, you
can specify 100 or more prints.
i When the specified total number of prints is 100 or more, the total number of prints
indication appears as [w]. During printing the remaining number of prints indication
also appears as [w]; when the remaining number of prints becomes 99, the correct
number is shown on the display.
If printing does not begin...
i It is not possible to print if there are 1980 or more DPOF specified prints. Decrease
the number of specified prints and repeat the procedure.
You can specify borderless prints and sharpness printing (see page 42).
Mode
Image
Number
Setting
2
2
PRINTING
2
41
English