Conair CGS19A User Manual page 6

OPERATING INSTRUCTIONS
1. The CGS19A Fabric Steamer functions as both a steamer and
an iron. Simply depress the rotating handle release button and
rotate the handle out for steaming and in for ironing.
2. Plug the unit into your electrical outlet. Both red and green
lights will glow. Red light indicates the appliance is plugged in
and the green light indicates the appliance is heating up. When
the green light goes off, the appliance is ready. The appliance
can be used continuously, regardless of the status of the green
light. Do not press the steam button before the green light goes
off for the first time.
3. Remove the soleplate cover/attachment; rest unit vertically with
soleplate elevated.
4. If using the unit for pressing, turn the Variable Temperature
Control Dial to the appropriate setting for the fabric that you
will be pressing. Check the fabric label to confirm your fabric
type.
Settings are as follows:
Low: 1 dot (·) for synthetic fabrics
Medium: 2 dots (··) for wool and silk
High: 3 dots (···) for cotton and linen
Steam becomes available at the high setting.
5. When first using the device, test on an old cloth, as there may be
sediment left from transportation or manufacturing.
Unplug the device when it is not in use.
REMOVING OR REPLACING THE SOLEPLATE COVER WITH LINT
FABRIC BRUSH AND CREASE ATTACHMENTS
The lint/fabric brush and crease attachments are designed to attach
to the soleplate for easy use.
1. Use caution when removing or replacing the attachments
to avoid touching a hot surface. It is recommended that the
appliance cools off before attachments are changed.
2. Holding the unit in one hand, turn it over so the attachment is
facing up.