Table of Contents
Advertisement
Components and measurement values
Item number
Component
80 790 43
Motor 50 Hz,
220/240 V
80 814 04
Motor 50 Hz,
220/240 V
80 766 90
Motor 60 Hz, 220/240 V
80 814 05
Motor 60 Hz,
220/240 V
80 801 19
Capacitor 8 μF, 400V
80 638 09
Condensing waterpump
25W
80 762 02
EMC filter with inductor
80 762 24
Thermistor
80 792 00
Thermostat (135°C)
80 773 85
Thermostat/Overheating
protection
(150°C automatic)
80 797 37
Thermostat/Overheating
protection , 150°C (USA)
80 761 04
Door switch
80 761 03
Microswitch float
Measurement value
Main winding: 23.8 Ω
Auxiliary winding: 28.1 Ω
Current: 1.1 A; 270 W;
2850 rpm
Main winding: 22,9 Ω
Auxiliary winding: 31 Ω
Current: 0,7 A; 150 W;
2850 rpm
Main winding: 16,0 Ω
Auxiliary winding: 25,5 Ω
Current: 0,9 A; 200 W;
3300 rpm A; 200 W; 3300
rpm
Main winding: 22,9 Ω
Auxiliary winding: 31,0 Ω
Current: 0,8 A; 200 W;
3300 rpm
111 Ω
40 – 60 kΩ (at room tem-
perature 20 – 30°C)
Service manual TD25
Comments
ACC motor serial prod W646
The motor is a 2-pin motor and is directly
connected to the fan for internal air and
gearing for driving the cylinder. The fan for
external air is also driven on condenser
dryers. All resistance values have toleran-
ces of ±7 %.
ACC motor serial prod W648
The capacitor is mounted on the motor.
The filter eliminates interference to and
from the machine.
The thermistor controls temperature
regulation. If the thermistor is short-circui-
ted or detaches from the control unit, the
programme is cancelled.
The thermostat automatically disconnects
the heating loop at too high temperatures.
The thermostat
/overheating protection interrupts the
programme at too high temperatures.
The thermostat/overheating protection
interrupts the programme at too high
temperatures.
The front door affects a door switch,
which interrupts the programme when
the door is opened. If the door has been
opened and closed during the programme
the machine must be restarted using the
start/stop button.
If both containers are overfilled the pro-
gramme is interrupted by a float switch
located on the lower holder. Overfilling is
indicated in the display.
13
Advertisement
Table of Contents
