Powermatic 72 Operating Instructions And Parts List Manual page 3

12"-14" tilting arbor saw
Table of Contents

Advertisement

Model 72 - 12"/14" Tilting Arbor Saw
OPERATING INSTRUCTIONS
SAFETY RULES, cont'd
8.
Stand to one side of saw blade and do not allow any other person to stand in line with the
saw blade.
9.
Use the splitter, blade guard, push stick and other safety devices for all operations where they
can be used. On operations such as dadoing or molding where such devices cannot be used, use
feather boards, fixtures or other safety devices and use extreme caution. Reinstall the splitter
and blade guard immediately after completing the operations that required their removal.
10. Do not reach over the saw blade to remove stock; use a pusher stick or have a helper or "tail
man" take it away.
11. If leaving the machine area, turn off the machine and wait until the saw blade comes to a com-
plete stop before departing.
12. Give the work you're doing, and the saw or cutter your undivided attention. Looking around,
carrying on a conversation and "horse play" are careless acts that can result in serious injury.
13. Never climb on or near the saw. Keep an evenly balanced stance with your weight on both feet.
Avoid awkward operations and hand positions where a sudden slip could cause your hand to con-
tact the blade.
14. Do not leave long or wide boards unsupported where spring or weight could cause the board to
shift position.
15. Do not remove the insert or make any adjustment with the saw blade rotating and disconnect the
machine from its power source when changing blades or cutters or performing any maintenance.
16. Bolt the saw to the floor through the lag holes provided to avoid any tendency of the saw to tip or
shift during cutting operations.
17. Provide for adequate surrounding work sp4ce 4nd overhead non-glare lighting.
18. Use only Powermatic or factory authorized replacement parts and accessories; otherwise, the
warranty and guarantee are null and void.
19. Do not use this Powermatic saw for other than its intended use as a table saw. If used for other
pprposes, Powermatic disclaims any real or implied warranty and holds itself harmless for any
injury that may result from that use.
WARNING:
Do not equip or use this machine with a motor larger than
7~
horsepower at
3600 RPM. The use of
·
a larger horsepower or higher speed motor voids the war-
ranty and Powermatic holds itself harmless for any injury that may result.
Page - 3 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents