To start the Power Hoe
1. Connect female extension cable
connector to the male plug lead
on your product. (Fig J).
2. Form a loop in the mains cable
and push the loop through the
slot as illustrated in Fig K1.
3. To secure, position loop over the
hook (K2) and pull the cable
back through the slot (K3).
4. Connect plug to mains and
switch on.
5. For slower speeds
move rocker switch forward with
thumb and squeeze switch lever
on handle (See Fig. L).
Keeping the switch lever
squeezed, the thumb can be
removed from the rocker switch.
6. For faster speeds
move rocker switch backward
with thumb and squeeze switch
lever on handle (See Fig. M).
Keeping the switch lever
squeezed, the thumb can be
removed from the rocker switch.
7. When the Power Hoe has
reached required speed, gently
lower it into the soil.
Note
•
The speed can be varied by
slightly releasing pressure on
the switch lever. (Fig N)
To stop the Power Hoe
1. Fully release the pressure on
the switch lever. (Fig. P)
Starting and Stopping
J
K
see note,
see note,
L
1
N
1
3
M
1
2
P
5
2
2