Pc Settings Menu - Technika LCD 19-220 Manual

PC SETUP MENU
To access this menu, press [MENU] button on the remote control.
If you wish to make changes to any of the default settings, use the scroll
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Auto Adjust - Lets you automatically confi gure the television to be used as a computer monitor
Horizontal Position - Changes the horizontal position of the picture
Vertical Position - Changes the vertical position of the picture
Phase - To adjust delay time of phase in order to reduce the noise of picture
Clock - Alter this in order to reduce the noise within the picture
Tip: If the computer is left in-active for a period of time, the television will switch into a 'sleep' state
(the screen will power off to save power). To switch back on press the standby button.
24
TEchnika Manual 19-22-220 .indd Sec1:24 TEchnika Manual 19-22-220 .indd Sec1:24
PC Operation
AV
buttons. To confi rm
13/01/2010 13:03:29 13/01/2010 13:03:29