Memory Check; Keyboard Test; Mouse (Pad) Test; Lcd Pixels Mode Test - Toshiba Satellite Maintenance Manual

3. Tests and Diagnostics

3.1 The Diagnostic Test

This chapter explains how to use the Test & Diagnostic program to test the functions of the
(Base on Los Angeles 10A+/10AG+/10AL+ T&D version 1.2) hardware modules. The Test &
Diagnostic Program is stored on the T&D diskettes. The program consists of a series of tests that
run automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
 CONFIG CHECK TEST
 Beep sound TEST
 FAN ON/OFF TEST
 MAIN BATTERY CHARGE TEST
 FDD TEST
 Memory check
 KEYBOARD TEST
 MOUSE(PAD) TEST
 LCD PIXELS MODE TEST
 MAGNETIC SWITCH TEST
 LAN TEST
 RTC TEST
 IEEE1394 CODE TEST
 Speaker EQ Check&Rewrite
 Button Test
 Front Edge logo Check
st
 1 HDD Test
nd
 2
HDD Test
 RDMI Test
 WDMI Test
You will need the following equipment to perform some of the Diagnostic test programs.
 The diagnostics USB disk
 A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
 A LAN loopback
4