Error! Style not defined. Error! Style not defined.
4. Remove six M2x3 screws according to the sequence indicated in Figure 4.38 on each side
of the LCD hinge assembly and then remove the LCD hinge assembly.
2
3
1
5. Turn the LCD module over and place it face down on a protective surface, such as a foam
pad.
6. Remove the tape and LVDS cable connector. Then detach the LVDS cable.
Satellite L450/Pro L450/L450D/Pro L450D Maintenance Manual
M2×3*6
Figure 4.38 Removing the LCD Hinge Assembly
Figure 4.39 Removing the LCD module
4 Replacement Procedures
2
3
1
4-45