Fingerprint Board(Bto) Troubleshooting; Procedure 1; Diagnostic Test Program Execution Check - Toshiba Satellite M500 Maintenance Manual

2.15 Fingerprint Board(BTO) Troubleshooting

This section describes how to determine if the computer's fingerprint board is functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check

Procedure 1

Diagnostic Test Program Execution Check

Insert the fingerprint board test program in the USB key, turn on the computer and run the
test. Refer to Chapter 3, Tests and Diagnostics, for more information about the diagnostics
test procedures.
If any errors occur while executing the fingerprint board test, go to Procedure 2.
Satellite M500/M505/M507 Maintenance Manual [CONFIDENTIAL]
2 Troubleshooting Procedures
2-47