4 Replacement Procedures
2. Peel off the LCD mask seals and remove the following screws.
•
M2.5×5B
3. Separate the LCD cover and cover assembly while releasing the latches.
LCD cover
LCD mask seal
4-90
[CONFIDENTIAL]
FLAT HEAD screw
Figure 4-57 Removing the LCD cover
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
4.31 LCD unit/FL inverter
×2
LCD mask seal
M2.5x5B FLAT HEAD
M2.5x5B FLAT HEAD
Slit