Using A Cassette Recorder - Radio Shack TRS-80 PC-3 Owner's Manual

Table of Contents

Advertisement

Caution:
In case an error (ERROR code 8) occurs due to a paper misfeed, tear off the paper tape, and pull the remaining part of the
paper tape completely out of the Printer. Then press the
@
key to clear the error condition.
When the Printer/Cassette Interface is exposed to strong external electrical noise, it may print numbers at random. If this
happens, depress the
~
key to stop the printing; then press the
@
key.
Pressing the
@
key will return the Printer to its normal condition.
[
When the Printer causes a paper misfeed or is exposed to strong external electrical noise while printing, it may not operate]
normally and only the symbol "BUSY" is displayed. If this happens, depress the
~
key to stop the printing. (Release
the paper misfeed.) Press the
@
key.
When the PC-3 Printer/Cassette Interface is not in use, turn off the Printer switch to save the battery life.
Even while printing under the LPRINT command, the entry can be executed when an INPUT, INKEY$ or PRINT command is
performed.
In this case, however, the Printer will stop if the
@
key is pressed. Therefore, be sure to press the
@
key upon completion
of printing.
Using a Cassette Recorder
With the Cassette Recorder connected, you can use the following commands:
CSAVE
CLOAD
CLOAD?
Saves the contents of a program or reserve memory on tape.
Retrieves a program or reserve memory from tape.
Compares the program on tape with the contents of memory to insure that you have a good copy.
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents