Grundig Cosmopolit 7 A WEB User Manual page 14

SETTINGS
Note:
If »Update from FM« or »Update from DAB«
7
was selected, continue from point 7.
5 Select the time zone (ex. »UTC +00:00 Dublin,
London«) with » « or » « and press »OK« to
confirm.
– Display: »Daylight savings« menu opens.
Time/Date Daylight savings
Daylight saving
ON
6 Select Daylight savings (for Central Europe)
with » « or » « to select »ON«and press
»OK« to confirm.
Winter time is set using »OFF«.
– The menu »Wlan region« appears.
Wlan region
Time/Date
Most of Europe
USA
Canada
Spain
France
7 Select one of the WLAN regions with » « or
» « and press »OK« to confirm.
(This setting depends on the location where
you are operating your Cosmopolit.)
– T he »SSID« menu appears, and the avail-
able networks (access points) are displayed.
Time/Date SSID
[WPS]gimdsl
grinternet
[Rescan]
[Wired]
[Manual config]
14­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
OFF#
Notes:­
If you wish to connect via a LAN cable, select
7
the option »[Wired]« with » « or » « and
press »OK« to confirm.
The initial set-up is then finished.
If the connection to the router is via a WLAN,
7
there are two options, depending on the
router in use: If the router supports [WPS],
then continue operation from step 8/9 or
step. 8/10 . If the router does not support
[WPS], then continue operation from step 11.
If the network name (SSID) is suppressed on
7
the WLAN router for security reasons, the
network cannot be found. It must then be en-
tered manually. Select the option »[Manual
config]« with »
V
to confirm. Continue with the chapter "Spe-
cial Settings" – "Registering the device ...",
on page 40.
If the connection to the router is via a
7
WLAN, there are two options, depending
on the router in use: If the router supports
[WPS], then continue operation from step
8/9 or step. 8/10 . If the router does not
support [WPS], then continue operation
from step 11.
8 Select your wireless [WPS] network with »
or » « and press »OK« to confirm.
Λ
Note:
T here are two options for logging on to a
7
[WPS] network: using the push button on
the router menu or by entering a PIN on
the router.
9 Select the option »Push-Button« with »
» « and press »OK« to confirm.
Λ
Activate the »Push Button« function on the
router (menu or button) and press »OK« on
the device within 2 minutes.
– D isplay: »Please wait, connecting« and then
»Connected«.
End setting with »OK« on the device ;
or
« or » « and press »OK«
Λ
V
«
V
« or