Sirius Satellite Radio XM SkyDock User Manual page 28

Vehicle Installation
Setting Up the Power Connect FM Transmitter
Your XM SkyDock includes the SIRIUS|XM Power Connect FM transmitter that will
'broadcast' its audio to your vehicle's FM radio if you have not used the included audio
cable to connect the XM SkyDock to your vehicle's audio system .
1 . On the Home Screen, tap the Settings
button . The Settings screen will appear .
2 . Tap the FM Settings listing . The FM Settings
screen will appear . Tap the On/Off button to
turn the FM transmitter OFF .
3 . Tune through your vehicle radio's FM
channels to find an FM channel (between
88 . 1 MHz and 107 . 9 MHz) that is not
broadcasting in your area . (If you use an
FM channel that is being used by a local
broadcaster, it will interfere with your XM
SkyDock's performance .) . Review the Find
Available FM Channels in Your Area section
on page 87 if you need more information .
4 . Once you have located an FM channel that
is not broadcasting in your area, save it as a
preset on your vehicle radio . This will become
your XM SkyDock preset .
5 . Tap the On/Off button on the XM SkyDock's FM Settings screen again to turn the
FM transmitter ON . The first preset (factory set to 88 . 1 MHz) will be highlighted .
This may not be the best frequency for your area .
28
Settings Screen
FM Settings Screen