Sirius Satellite Radio XM SkyDock User Manual page 20

Sirius xm skydock user guide

Hide thumbs Also See for XM SkyDock:

Table of Contents

Vehicle Installation

Inserting the Spacers

Your XM SkyDock comes with three numbered rubber spacers that assure a proper fit

with different iPhone and iPod touch models, with and without aftermarket cases that

surround and protect the iPhone or iPod touch .

IMPORTANT: The XM SkyDock will accommodate many,

but not all types of after-market cases . Compatible

cases must be no thicker than 2mm in any dimension

and must have a large enough open area around the

connector at the bottom of the iPhone or iPod touch to

allow it to seat properly in the XM SkyDock .

Spacer 1:

For iPhone with compatible case

Spacer 2:

For iPhone without case; for iPod touch with

compatible case

Spacer 3:

For iPod touch without case

Install the appropriate Spacer by inserting it all the

way into the recess in the XM SkyDock .

Removing the Spacers

1 . Use one finger to apply sliding pressure on

the Spacer towards one of the Side Grip

arms .

2 . Using another finger, pry up under the edge

of the Spacer to release it .

Recess

Spacer

1. Press Spacer &

Slide Towards

Side Grip

2. Pry Spacer Up

and Remove

Table of Contents