Advertisement
Quick Links
METAL CUTTING CIRCULAR SAW
DW934K2(H)
Congratulations!
You have chosen a D
WALT tool. Years of experience,
E
thorough product development and innovation make
D
WALT one of the most reliable partners for
E
professional power tool users.
Technical data
Voltage
Power output
No-load speed
Blade diameter
Depth of cut
Blade body thickness
Blade bore
Weight (without battery pack)
Battery pack
Voltage
Capacity
Weight
Charger
Mains voltage
Charging time
Weight
Fuses:
Europe
230 V tools
U.K. & Ireland
230 V tools
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in this
manual.
Denotes risk of electric shock.
DW934K2(H)
V 18
W 315
min
-1
3,100
mm 173
mm 61
mm 1.4
mm 20
kg 3.85
DE9095
DE9039
V 18
18
Ah 2.0
3.0
kg 1.0
1.0
DE9108
DE9116
V
230
230
AC
min 60
60
kg 0.4
0.4
10 Amperes, mains
13 Amperes, in plugs
EC-Declaration of conformity
DW934K2(H)
D
WALT declares that these Power Tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, EN 50144, EN 50260,
EN 60335, EN 55014-2, EN 55014-1,
EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC &
98/37/EEC, measured according to EN 50144:
L
(sound pressure)
pA
L
(acoustic power)
WA
* at the operator's ear
Take appropriate measures for the
protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value
according to EN 50144:
Director Engineering and Product Development
Horst Großmann
D
WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E N G L I S H
WALT at the
E
DW934K2(H)
dB(A)*
86
dB(A)
99
DW934K2(H)
2
25 m/s
23
Advertisement
Related Manuals for DeWalt DW934K2(H)
Summary of Contents for DeWalt DW934K2(H)
- Page 1 E N G L I S H METAL CUTTING CIRCULAR SAW DW934K2(H) Congratulations! EC-Declaration of conformity You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users.
- Page 2 E N G L I S H Safety instructions 10 Do not overreach When using Power Tools, always observe the Keep proper footing and balance at all times. safety regulations applicable in your country to 11 Stay alert reduce the risk of fire, electric shock and personal Watch what you are doing.
- Page 3 E N G L I S H +40 ˚c Additional safety instructions for battery packs +4 ˚c Charge only between 4 °C and 40 °C Fire hazard! Avoid metal short circuiting the contacts of a detached battery pack. Do not store or carry the battery pack Discard the battery pack with due care without the battery cap placed over the for the environment...
-
Page 4: Package Contents
E N G L I S H Operational protection devices Personal health • Ensure that all devices screening the saw blade • Warning! Use of this tool can generate dust are in perfect working order. containing chemicals known to cause cancer, •... - Page 5 E N G L I S H Using the appropriate cutting blade, it can cut hot • Only fit 13 Amperes BS1363A approved plugs and cold rolled carbon steel, construction steels fitted with the correctly rated fuse (1). according to DIN 1700 (ST33, ST37-2). This tool is •...
- Page 6 E N G L I S H If the mains is functioning but the battery pack does For optimal results, allow the saw blade not charge, take your charger to an authorised to protrude from the workpiece by about WALT repair agent. Whilst charging, the charger 3 mm (see inset in figure C).