1. Manuals
  2. Brands
  3. Longshine Manuals
  4. Wireless Router
  5. IEEE 802.11n Wireless Series
  6. User manual

Longshine IEEE 802.11n Wireless Series User Manual

Wireless travel router
Hide thumbs Also See for IEEE 802.11n Wireless Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
IEEE 802.11n Wireless Series
Wireless Travel Router

User Manual

Advertisement

Table of Contents
loading

Related Manuals for Longshine IEEE 802.11n Wireless Series

Summary of Contents for Longshine IEEE 802.11n Wireless Series

  • Page 1: User Manual

    IEEE 802.11n Wireless Series Wireless Travel Router User Manual...
  • Page 2 Wireless 11n Router FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Ce Mark Warning

    Wireless 11n Router CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class B for ITE, the essential protection requirement of Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and R&TTE Directive 1999/5/EC...

  • Page 4: Table Of Contents

    Wireless 11n Router Contents Unpacking Information ········································································································ 5 Chapter 1 Introduction to Wireless Router ····································································· 6 General Description······················································································· 6 Key Features ································································································· 6 The Front Panel····························································································· 7 The Rear Panel ····························································································· 8 Placement (Optional)····················································································· 9 Chapter 2 Installing and Using Wireless Router··························································· 10 Connecting this Router to your network ······················································...
  • Page 5 Wireless 11n Router 3.9.3 DDNS Settings ····················································································· 48 3.9.4 Time Zone Setting ················································································ 49 3.9.5 Denial-of-Service·················································································· 50 3.9.6 Log ······································································································· 51 3.9.7 Upgrade Firmware ··············································································· 52 3.9.8 Save/Reload Setting ············································································ 52 3.9.9 Password ····························································································· 53 Appendix A: Product Specifications ·················································································· 54 Appendix B: Glossary ·······································································································...

  • Page 6: Unpacking Information

    Wireless 11n Router Unpacking Information Thank you for purchasing the product. Before you start, please check all the contents of this package. The product package should include the following: 1. One Wireless Router with one antenna 2. One Power Adapter 3.

  • Page 7: Introduction To Wireless Router

    Wireless 11n Router Chapter 1 Introduction to Wireless Router 1.1 General Description Draft 802.11n Wireless Connectivity The IEEE802.11n Wireless Router provides a better wireless signal for network than existing wireless 802.11g technology. It complies with IEEE 802.11n draft 2.0 and IEEE802.11b/g wireless standards.

  • Page 8: The Front Panel

    Wireless 11n Router 1.3 The Front Panel Name Status Indication No power Power Power is on Blink Green one time System reboot Blink Green WPS Connecting Dark System Stability The wireless function is disabled WLAN Flashing The wireless function is enabled Flashing fast Sending or receiving data over wireless There is no device linked to the corresponding port or the...

  • Page 9: The Rear Panel

    Wireless 11n Router 1.4 The Rear Panel The rear panel of the Wireless Router is shown below.  LAN: Through these ports, you can connect the Router to your PCs and the other Ethernet network devices.  WAN: This WAN port is where you will connect the cable/DSL Modem, or Ethernet. ...

  • Page 10: Placement (Optional)

    Wireless 11n Router 1.5 Placement (Optional) There are two ways to place the Router. The first way is to place the Router vertically on a surface. The second way is to attach it to the wall. If you select a wall-mount option, please follow the steps below: 1.

  • Page 11: Chapter 2 Installing And Using Wireless Router

    Wireless 11n Router Chapter 2 Installing and Using Wireless Router This chapter provides a step-by-step guide to the installation and configuration of the Wireless Travel Router. We suggest you go over the whole chapter and then do more advanced operation. Connecting this Router to your network Steps to build up the network: ...
  • Page 12 Wireless 11n Router Procedures to configure IP addresses for your computer 1. If you are in Classic Start menu view, click Start > Settings > Network Connections. If you are in Start menu view, click Start > Control Panel > Network Connections. 2.
  • Page 13 Wireless 11n Router 3. Choose Internet Protocol (TCP/IP) and click Properties. 4. You may choose “Obtain an IP address automatically” (recommend) to get IP address automatically or choose “Use the following IP address” to specify IP addresses manually. Please click the OK button after your configuration.

  • Page 14: Chapter 3 Management

    Wireless 11n Router Chapter 3 Management Starting the WEB-Based Management Interface The device uses WEB as the management interface. You can use a browser to access the management interface easily. Please follow the steps listed below. 1. Open the Internet WEB browser. 2.

  • Page 15: Setup Wizard

    Wireless 11n Router Setup Wizard If you are using the router for the first time, please follow the procedures of the setup wizard to do a step-by-step configuration. Note: The following instruction does an overall introduction to the Setup Wizard. For detail information to each item, please refer to instruction of each page.
  • Page 16 Wireless 11n Router 2. Select your demanding operation mode and click “Next”. 3. Mark the check box to enable synchronizing time by NTP server. Select the religion you live and a NTP server by clicking the drop list then click “Next”.
  • Page 17 Wireless 11n Router 4. Specify an IP address and subnet mask for connecting to the router in LAN. 5. Select a WAN access type for the router to connect to Internet. Fill in the parameters that are required in each blank, and then click the “Next” button. You may get those parameters from your ISP.
  • Page 18 Wireless 11n Router Items Information 2.4GHz(B),2.4GHz(G),2.4GHz(N),2.4GHz(B+G),2.4GH Band z(G+N), 2.4GHz(B+G+N) Mode AP, Client, WDS, AP+WDS Network Type Infrastructure, Ad-hoc Channel Width 40MHz, 20MHz ControlSideba Upper, Lower Channel Auto,1,2,3,4,5,6,7,8,9 Number This contains USA(FCC), Canada(IC), Europe(ETSI), Country Spain, France, Japan(MKK) 7. Click the drop list to select the encryption type for your wireless network. Fill in the parameters for the encryption type you select and click finish to complete configuration.

  • Page 19: Operation Mode

    Wireless 11n Router Operation Mode To select an operation mode for this router, click on the mode that you want to perform and click button to execute. Wireless 3.5.1 Basic Settings You can set up the configuration of your Wireless basic settings and monitor the Wireless Clients associate with your router.
  • Page 20 Wireless 11n Router Items Information Disable Wireless LAN Mark the checkbox to disable interface of Wireless LAN Interface To select a band for this device to match 802.11b, 802.11g, 802.11n, 802.11b/g, 802.11g/n or 802.11b/g/n. optional parameters: Band 2.4GHz(B),2.4GHz(G),2.4GHz(N),2.4GHz(B+G),2.4GHz(G+N), 2.4GHz(B+G+N) Configure this device as AP, Client, WDS or AP+WDS. If you set this device as AP or AP+WDS mode, the button is Mode...
  • Page 21 Wireless 11n Router a router or AP. It is also know as a peer-to-peer network. Infrastructure Mode: the wireless network contains at least one wireless client and one wireless AP or router. This client connects to Internet or intranet by communicating with this wireless AP. SSID Service set identifier (SSID) for the name of the wireless network.

  • Page 22: Advanced Settings

    Wireless 11n Router 2. Active Wireless Client Table This is the window that pops up after clicking the button. 3.5.2 Advanced Settings You can set advanced wireless LAN parameters of this router. We recommend not changing these parameters unless you know what changes will be on this router.
  • Page 23 Wireless 11n Router Items Information This value should remain at its default setting of 2346. If you Fragment experience a high packet error rate, you may slightly increase your Threshold fragmentation threshold within the value range of 0 to 2346. Setting the fragmentation threshold too low may result in poor performance.

  • Page 24: Security

    Wireless 11n Router RF Output Power Select the signal strength for the wireless network. * Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations. 3.5.3 Security The Security function protects your wireless network from invasion. We provide WEP and WPA encryption to secure your wireless network.
  • Page 25 Wireless 11n Router Items Information Encryption Select a security encryption mode for this router. Authentication There provide three options for selecting: Open System, Shared Key, Auto Key Length Select 64-bit or 128-bit as the key encryption length. Key Format Select ASCII or Hex to setup the key value.
  • Page 26 Wireless 11n Router Items Information There are two items, “Enterprise (RADIUS)” and “Personal Authentication Mode (Pre-Shared Key)”. You can select the mode by clicking the item. Select the WPA Cipher Suite to be TKIP or AES. WPA Cipher Suite Pre-Shared Key To decide the format, select Pass phrase or Hex in the drop Format list.
  • Page 27 Wireless 11n Router 3. Security Mode – WPA-Mixed Items Information Authentication Mode There are two items, “Enterprise (WPA-Radius)” and “Personal (Pre-Shared Key)”. You can select the mode by clicking the item. WPA / WPA2 Cipher Suite Select the WPA/WPA2 Cipher Suite to be TKIP or AES. Pre-Shared Key Format To decide the format, select Passphrase or Hex in the drop list.

  • Page 28: Access Control

    Wireless 11n Router 3.5.4 Access Control To restrict the clients of Access authentication of Stations, set up the control list in this page. Items Information Wireless Click on the drop list to choose the access control mode. You may select “Allow Access listed”...

  • Page 29: Wds Settings

    Wireless 11n Router 3.5.5 WDS Settings When you use this device as WDS or AP+WDS mode, “WDS Setting” function can be operated. Wireless Distribution System allows the router to communicate with other APs wirelessly. To make it work, you must ensure that these APs and the Router are in the same channel. Please add these APs MAC address and comment values into the WDS list.

  • Page 30: Wps Settings

    Wireless 11n Router can be used to scan nearby Router and AP again. 3.5.7 WPS Settings The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. This Router supports the configuration setup using PIN configuration method or PBC configuration method through an internal or external Registrar.

  • Page 31: Schedule

    Wireless 11n Router Client PIN Personal Identification Number (PIN) method. Users have to fill in the Number PIN code of enrollee device and click on the button to make communication with other AP. After click on the button, please run the client’s WPS and push the PIN button within 2 minutes.

  • Page 32: Tcp/Ip Settings

    Wireless 11n Router TCP/IP Settings 3.6.1 LAN Interface Setup To set up the configuration of LAN interface, private IP of your router LAN port and subnet mask for your LAN segment. Items Information IP Address The IP of your Router LAN port (default 192.168.1.1). Subnet Mask of you LAN (default 255.255.255.0).
  • Page 33 Wireless 11n Router Domain Name (Optional) The name of your local domain. 802.1d Spanning To prevent from network loops and preserve the quality of bridged Tree network Your ISP may require a particular MAC address in order for you to connect to the Internet.

  • Page 34: Wan Interface Setup

    Wireless 11n Router 2. Static DHCP Setup This is the window that pops up after clicking the button. Click on the list to change configuration. To delete the station on the list, mark the check box in the select item and click the “Delete Selected”.
  • Page 35 Wireless 11n Router 1. Static Mode (fixed IP) Devices that are assigned the same IP address may not be visible on the network. Enter the IP address of the DNS server. The DNS server translates domain names into IP addresses.
  • Page 36 Wireless 11n Router Items Information IP Address, Subnet Mask and Fill in the IP address, Subnet Mask and Default Gateway Default Gateway that provided by your Internet Service Provider (ISP). To Enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending.
  • Page 37 Wireless 11n Router To specify the Domain Name System (DNS). The DNS server translates domain names into IP addresses. Set DNS Manually Enter the DNS provided by your ISP in 1 and 3 server. * Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations. 3.
  • Page 38 Wireless 11n Router To Enable the Maximum Transmission Unit of Router setup. Any packet over this number will be chopped up into suitable size before sending. Larger number will enhance the MTU Size transmission performance. Enter your MTU number in the text-box to set the limitation (default 1452 bytes).
  • Page 39 Wireless 11n Router Items Information Fill in IP address & Subnet Mask that match the same IP address & Subnet Mask subnet provided by your Internet Service Provider (ISP). Fill in Username and Password that provided by your Username and Password Internet Service Provider (ISP).
  • Page 40 Wireless 11n Router Items Information Fill in IP address & Subnet Mask that match the same IP address & Subnet Mask subnet provided by your Internet Service Provider (ISP). Fill in the Username and Password that provided by your Username and Password Internet Service Provider (ISP).
  • Page 41 Wireless 11n Router 6. Common configurations for WAN interface There are some settings are able to be configured on each WAN access types: Items Information When ISP use MAC address authentication (with DHCP), then the MAC address of the Ethernet card attached to your Cable modem must be registered with the ISP before connecting to the WAN (Internet).

  • Page 42: Firewall Settings

    Wireless 11n Router Firewall Settings 3.7.1 Port Filter The firewall could not only obstruct outside intruders from intruding your system, but also restricting the LAN users. Port filter restricts certain type of data packets from your LAN to Internet through the router. Items Information Enable Port Filtering...

  • Page 43: Ip Filter

    Wireless 11n Router 3.7.2 IP Filter The Wireless Router could filter the outgoing packets for security or management consideration. Items Information Mark to enable the configuration, and clear to disable. Enable IP Filtering Local IP Address Fill in the IP address that you wish to filter. Protocol Select the protocol type of “TCP”, “UDP”...

  • Page 44: Mac Filter

    Wireless 11n Router 3.7.3 MAC Filter The Wireless Router could filter the outgoing packets for security or management consideration. Items Information Enable MAC Filtering Mark to enable the configuration, and clear to disable. MAC Address Fill in the MAC address that you wish to filter. Comment Input any text to describe this mapping.

  • Page 45: Port Forwarding

    Wireless 11n Router 3.7.4 Port Forwarding The Port Forwarding allows you to re-direct a particular range of service port numbers (from the Internet/WAN Ports) to a particular LAN IP address. Items Information Enable Port Forwarding Mark to enable the configuration, and clear to disable. IP Address Fill in the IP address that you wish to forward.
  • Page 46 Wireless 11n Router Items Information Enable URL Filtering Mark to enable the configuration, and clear to disable. URL Address Fill in the URL address that you wish to filter. Lists the URL Filter Settings you have added before. To delete the settings on the list, click the check box in the Current Filter Table select item and click the “Delete Selected”.

  • Page 47: Dmz

    Wireless 11n Router 3.7.6 DMZ To configure it, mark to enable virtual DMZ and then enter the Host IP (private IP address) and click to enact the setting. The QoS (Quality of Service) Settings page provides different priority to different users.

  • Page 48: Management

    Wireless 11n Router Management 3.9.1 Status This information page shows the current settings of this device. You could check if the parameters match your configuration. 3.9.2 Statistics This page allows use rs to get information of data transferring condition, and monitor the status and performance of this router including receiving and sending packets.

  • Page 49: Ddns Settings

    Wireless 11n Router 3.9.3 DDNS Settings DDNS (Dynamic Domain Name Server) service allows users to connect to this device via a fixed and easy-to–remember hostname. This router supports DDNS service of following service providers: DynDNS (http://www.dyndns.org), TZO (http://www.tzo.com) Please go to one of DDNS service provider’s web page listed above, and get a free DDNS account by the instructions given on their web page.

  • Page 50: Time Zone Setting

    Wireless 11n Router User Name/Email DDNS login account. For DynDNS users, please fill in your user name; for TZO users, please fill in your email address. Password/Key The password of your DDNS service account. * Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.

  • Page 51: Denial-Of-Service

    Wireless 11n Router 3.9.5 Denial-of-Service A DoS (Denial of Service) attack attempt to disrupt the network and information system by sending abnormal packets to overload your Internet connection. DoS protect function helps to detect and block those malevolent DoS attack. It is strongly recommended that this setting be left enabled. Please mark to enable the DoS protection function.

  • Page 52: Log

    Wireless 11n Router 3.9.6 Log This System Log page shows the information of the current activities on the router. To enable system log function: Mark the “Enable Log” checkbox. To see all information of the system, select the “system all” checkbox. To see wireless information only, select the “wireless”...

  • Page 53: Upgrade Firmware

    Wireless 11n Router 3.9.7 Upgrade Firmware Sometimes a new firmware may be issued to upgrade the system of this device. You could upgrade the firmware you got in this page. To upgrade the firmware, please click on the button, locate the firmware in your computer and then click the button to execute.

  • Page 54: Password

    Wireless 11n Router 3.9.9 Password To set up the Administrator Account information, enter the Username, New password, and reenter the password on the text box. Don’t forget to click the to save the configuration.

  • Page 55: Appendix A: Product Specifications

    Wireless 11n Router Appendix A: Product Specifications IEEE 802.11n draft 2.0, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, Standard IEEE 802.3u LAN: 1 port 10/100 Mbps Ethernet, RJ-45 WAN: One RJ-45 port Interface 1* fixed antenna (Standard 1.8 dB) 1* reset to factory default button 1* WPS button Antenna type: Dipole Antenna...

  • Page 56: Appendix B: Glossary

    Wireless 11n Router Appendix B: Glossary  802.11b - The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks.
  • Page 57 Wireless 11n Router communicate with each other, all devices must be configured with the same SSID. This is typically the configuration parameter for a wireless PC card. It corresponds to the ESSID in the wireless Access Point and to the wireless network name. ...
  • Page 58 DECLARATION OF CONFORMITY IN ACCORDANCE WITH THE RADIO AND TELECOMMUNICATIONS TERMINAL EQUIPMENT ACT (FTEG) AND DIRECTIVE 1999/5/EC (R & TTE DIRECTIVE) = European Community Conformity Mark We, Manufacturer/Importer Longshine Technologie (Europe) GmbH An der Strusbek 9 22926 Ahrensburg Germany Declare, That The Product LCS-WRN-3211 Wireless 802.11b/g/n Router...

Table of Contents