Rowenta Ion Ceramic hairdryer User Manual page 6

1800127883_01_CV8528U2:Mise en page 1 12/11/12 14:20 Page6
IMPORTANT MESSAGE ABOUT ALCI SA-
FETY PLUG
1. "TEST" button ensures the ALCI plug device is operational.
2. "RESET" button clears the ground fault and restores the ALCI to
normal operation.
3.The ALCI should beTESTED every use.
4. When RED button extends OUT , the ALCI has operated.This indi-
cates that the appliance is not in proper functioning condition and is
to be discarded or returned to a secure service center for examina-
tion and repair.
5. If there is any indication that the appliance does not operate in the
proper functioning condition, it should be returned to a service cen-
ter for examination and repair (See "LIMITED WARRANTY" Sec-
tion).
This powerful professional Ionic Ceramic blow dryer features
cutting-edge Auto Sensor technology, for effortless styling and
faster drying.The concentrator attachment lets you achieve a
flawless salon-quality blowout. Infrared heat emitted by the
ceramic coating and Ionic-Ceramic technology allow for fast
styling while eliminating frizz and static, making hair silky soft
and manageable.
AUTO-SENSOR function:
This feature allows the hair dryer to go into automatic standby
when you release the handle, and switches back on
automatically when you hold it.
To enable the AUTO-SENSOR:
• Switch on the dryer: the speed switch (F) must be in position
LOW.
• Push the AUTO-SENSOR switch (G) down to the ON position.
To disable the AUTO-SENSOR:
• Push the AUTO-SENSOR switch (G) up to the OFF position.
TIP: If the AUTO-SENSOR function does not work, make sure
that the air speed switch is not on OFF . Check to see if the
AUTO-SENSOR switch is in the ON position.
IONIC-CERAMIC System (1-2):
Ionic-Ceramic system provides even heat distribution and
disperses negative ions which reduce frizz, static electricity and
maximize shine. Hair is smoother and easier to style!This
effect is reinforced by the gentle radiant heat emitted by the
ceramic coating.