Disp. Custom Setting; I Flash Compensation - FujiFilm XQ1 Owner's Manual

v DISP. CUSTOM SETTING v

DISP. CUSTOM SETTING

Choose the items displayed in the LCD monitor. The following items can be displayed:
FRAMING GUIDLINE*
WHITE BALANCE
HISTOGRAM
IMAGE SIZE/QUALITY
PHOTOMETRY
FILM SIMULATION
EXP. COMPENSATION
* You can also select the grid type (P 117).
See pages 6 – 7 for the locations of these items in the displays.
Virtual Horizon Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is
level when the two lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
I

I FLASH COMPENSATION

FLASH COMPENSATION
Adjust fl ash brightness. Choose from values between +2 EV and –2 EV. The default setting is ±0.
Note that the desired results may not be achieved depending on shooting conditions and the
distance to the subject.
Menus
Using the Menus: Shooting Mode
ELECTRONIC LEVEL
APERTURE/S-SPEED/ISO
FRAMES REMAINING
BATTERY LEVEL
FLASH
DYNAMIC RANGE
P
( ( default: default: ±0) ±0)
101