Jensen CD-600 Operating Instructions Manual page 7

REPEAT 1: When shown on the LCD display, the current track on the disc will be repeated.
REPEAT ALL: When shown in the LCD display, all tracks on the disc will be repeated.
NORMAL PLAYBACK
Play the whole disc. The playback will stop after the last track is finished.
INTRO
To play the first 10 seconds of each track on the disc.
• When in the STOP mode, press the MODE button three times. The icon "
corner. Press the
• During disc playback, press the MODE button three times and then press the skip backward
button to start INTRO playback. The flashing icon "
MODE button two more times to return to normal playback.
PROGRAM
This allows the selected tracks on the disc to be played in any desired order.
NOTE: Programs can be set in either PLAY or STOP mode.
1. Press the PROG button when the unit is in the PLAY/STOP mode.
The track number will appear in the display with the flashing "
2. Press or to select the desired track.
3. Press the PROG button to enter the track into the memory.
4. Repeat the step 2 and 3 to program up to 24 tracks into the memory.
5. Press to start the programmed play.
6. To stop the program play, press the STOP button once.
7. To check the programmed memory, press
8. To erase the program memory, open the lid or turn off the power by pressing the STOP button twice.
SHUFFLE
This enables all the tracks on a disc to be played in a shuffle (SHUF) or random sequence.
For example: If Shuffle mode is selected while playing track 8, the random function will commence once track 8
has ended.
1. During normal playback, press MODE button four times to activate random play. The icon "
shown in the left hand side of the display.
2. Press MODE button again to return to the NORMAL play mode.
Locating a Particular Track
To skip back to the beginning of the current or a
previous track
To skip to the beginning of following tracks
Locating a Particular Point in a Track
To search back at a high speed
To search forward at a high speed
Note: Low level audio will be heard during the search process to assist in locating correct point in the track.
This player incorporates the latest digital anti-skip circuitry which prevents interruption during playback if the unit
is subjected to shock or vibration. The anti-skip system will automatically be activated when a disc is played and
will show the flashing icon "ASP" in the display.
button to start INTRO playback.
SKIP AND SEARCH FUNCTIONS
DIGITAL ANTI-SHOCK OPERATION
" will be shown in the left corner. Press
" indicator.
or during PGM mode.
Press once or repeatedly.
Press once or repeatedly.
Press & hold
Press & hold
" will be shown in the left
" will be