Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Lyman Turbo Sonic 6000
Summary of Contents for Lyman Turbo Sonic 6000
- Page 1 Lyman ® Turbo ® Sonic 6000 Ultrasonic Cleaner Operating Instructions...
-
Page 2: Read Before Operating
After reading instructions, if you do not fully understand the operation of this machine you may contact Lyman customer service at 1-800-22LYMAN for further assistance. MAIN FEATURES •... -
Page 3: Features And Accessories
• Do not run unit for extended time: After 45 minutes of continuous use let unit stand for 20 minutes to prolong unit's life. • Never let items being cleaned come in contact with the tank. • Avoid areas that may have electromagnetic interference. FEATURES AND ACCESSORIES: A. -
Page 4: Control Panel And Operation
CONTROL PANEL AND OPERATION 1. Indicator Light - Working Status Green - Ready (G): Normal working status, ready to use Red - Overheat (R): Under overheat protection. 15 minutes of waiting time is needed for the light to change from red to green. Work can resume afterwards. - Page 5 10 11 12 13 Digital LED display of working items. It counts down after work is started. 9. Set temperature display. Press Temp button to select one of the 5 set temperatures. 10. Time button - Timer quick set button. Press the Time button, LED display shows 05:00.
-
Page 6: User Maintenance
OPERATING INSTRUCTIONS For step by step instructions please see our instructional videos on the Lyman Products website at : www.lymanproducts.com 1. Open the lid and remove basket. Place items into basket, then put bas- ket into the cleaning tank. Add water to a level between MIN and MAX to cover the items being cleaned. -
Page 7: Cleaning Solutions
CLEANING SOLUTIONS It is important to use the proper cleaning solutions for the material being cleaned. Lyman offers several different ultra-sonic cleaning solutions for your specific cleaning needs. Always follow the directions on the label of the cleaning solution for best results. - Page 8 • Parts to be cleaned should not have excessive oil - remove bulk oil before cleaning in this solution. • Not recommended for cleaning silver, sterling silver or silver plating. • Will effectively clean gold jewelry, but avoid immersion of gemstones in the solution as they may be damaged by the solution or sonic energy or both.
- Page 9 Ideal for deep cleaning gun parts and other steel items including reloading dies and mould blocks. Designed for use in Lyman Turbo Sonic cleaners and other ultrasonic cleaners. • Can be used to clean steel, stainless steel and alu- minum gun parts.
- Page 10 • Discard the solution when it becomes highly discolored or murky. Rinse the unit with clean water before recharging. • Do not mix with other cleaners or chemicals. For step-by-step instructional videos on using the Lyman Turbo ® Sonic Ultrasonic Cleaner Visit our website at: www.lymanproducts.com...
-
Page 11: Warranty/Repair Policy
If the item is out of warranty and is in need of repairs, the Lyman product should also be returned to the same address listed below. Appropriate charges will apply for parts and labor. Estimates are available only when the item has been thoroughly inspected by our repair personnel. -
Page 12: Specifications
15.0 lbs / 6.8 kg Unit Size 17.2 x 11.8 x 9.8 in. / 43.7 x 30.00 x 24.9 cm Box Size 20.3 x 14.0 x 12.6 in. / 51.5 x 35.5 x 32.0 cm Lyman ® 475 Smith Street Middletown, CT 06457 1-860-632-2020 www.lymanproducts.com...
Need help?
Do you have a question about the Turbo Sonic 6000 and is the answer not in the manual?
Questions and answers