After reading instructions, if you do not fully understand the operation of this machine you may contact Lyman customer service at 1-800-22LYMAN for further assistance. MAIN FEATURES •...
OPERATING INSTRUCTIONS For step by step instructions please see our instructional videos on the Lyman Products website at : www.lymanproducts.com 1. Open lid and remove basket. Fill tank with water or recommended cleaning solution mixture. Items to be cleaned should be covered by the liquid being used.
CLEANING SOLUTIONS It is important to use the proper cleaning solutions for the material being cleaned. Lyman offers several different ultra-sonic cleaning solutions for your specific cleaning needs. Always follow the directions on the label of the cleaning solution for best results.
Page 6
Ideal for deep cleaning gun parts and other steel items including reloading dies and mould blocks. Designed for use in Lyman Turbo Sonic cleaners and other ultrasonic cleaners. • Can be used to clean steel, stainless steel and aluminum gun parts.
If the item is out of warranty and is in need of repairs, the Lyman product should also be returned to the same address listed below. Appropriate charges will apply for parts and labor. Estimates are available only when the item has been thoroughly inspected by our repair personnel.
3.1 lbs / 1.4 kg Unit Size 8.98 x 6.77 x 5.63 in. / 228 x 172 x 143 mm Lyman ® 475 Smith Street Middletown, CT 06457 Customer Service: 1-800-22 LYMAN or 1-860-632-2020 www.lymanproducts.com Part # 7980516 Rev. 10/11...
Need help?
Do you have a question about the Turbo Sonic 700 and is the answer not in the manual?
Questions and answers