JVC HD-Z56RF7 Service Manual page 16

3.1.2.9 REMOVING THE MIRROR (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
(1) Remove the 2 screws [A].
(2) Remove the MIRROR HOLDER STOPPER.
(3) Remove the 2 screws [B] and the 2 screws [C].
(4) Remove the MIRROR HOLDER(UPPER).
(5) Remove the 4 screws [D].
(6) Remove the MIRROR HOLDER BRACKET.
(7) Remove the 6 screws [E] and the 2 screws [F].
(8) Remove the MIRROR HOLDER(both L/R side).
(9) Raise slightly to disengage of the MIRROR from the bottom
holder.
(10) Remove the MIRROR.
NOTE:
• Do not touch the front of the MIRROR.
• Do not shock the front of the MIRROR.
• Because of the large size, at least 2 persons are
recommended for removal and reassemble.
3.1.2.10 REMOVING THE BACK COVER BRACKET (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
(1) Remove the 6 screws [G] and the 1 screw [H].
(2) Remove the BACK COVER BRACKET(REAR).
(1) Remove the 8 screws [J] and the 1 screw [K].
(2) Remove the BACK COVER BRACKET(both L/R).
3.1.2.11 REMOVING THE SIDE CONTROL PWB (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
(1) Remove the 4 screws [L].
(2) Remove the SIDE CONTROL BASE.
(3) Remove the 2 screws [M].
(4) Remove the SIDE CONTROL PWB.
3.1.2.12 REMOVING THE SPEAKER BOX (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
• Remove the BACK COVER BRACKET.
(1) Remove the 3 screws [N].
(2) Remove the SPEAKER BOX.
(3) Remove the opposite SPEAKER BOX by the same
method.
1-16 (No.YA460)
3.1.2.13 REMOVING THE BACK COVER (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
• Remove the BACK COVER BRACKET.
• Remove the SPEAKER BOX.
(1) Remove the 4 screws [P] and the 2 screws [Q].
(2) Remove the BACK COVER.
CAUTION:
Because of the large size, at least 2 persons are
recommended for removal and reassemble.
3.1.2.14 REMOVING THE SHADE COVER (Fig.4)
• Remove the SPEAKER GRILL.
• Remove the CENTRE PANEL.
• Remove the SPEAKER.
• Remove the FRONT PANEL.
• Remove the SCREEN BLOCK.
• Remove the BACK COVER BRACKET.
• Remove the SPEAKER BOX.
• Remove the BACK COVER.
(1) Remove the 2 screws [R].
(2) Remove the SHADE COVER.
http://www.pureglare.com.au