Dell 1907FPc Service Manual page 14

www.ma163.com
NOTE: When using DVI source, the Positioning option is not
available.
Auto Adjust Even though your computer recognizes your monitor on startup, the Auto
Adjustment function optimizes the display settings for use with your particular
setup.
Select to activate automatic setup and adjustment. The following dialog appears
on a black screen as the monitor self-adjusts to the current input:
Auto Adjustment allows the monitor to self-adjust to the incoming video signal.
After using Auto Adjustment, you can further tune your monitor by using the Pixel
Clock (Coarse) and Phase (Fine) controls under Image Settings.
In most cases, Auto Adjust produces the best image for your
configuration.
The Phase and Pixel Clock adjustments allow you to more closely adjust your
Image
monitor to your preference. These settings are accessed through the main OSD
settings:
menu, by selecting Image Settings.
Use the - and + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100)
Pixel Clock If satisfactory results are not obtained using the Phase adjustment, use Pixel
(Coarse) Clock (Coarse) and then use Phase (fine), again.
NOTE: This function may change the width of the display image.
Use the Horizontal function of the Position menu to center the
Phase (Fine)
display image on the screen.
NOTE: When using DVI source, the Image Settings option is not
available.
Color Color Settings adjusts the color temperature, color hue, and saturation.
Settings
u5[Pb€ g /• D e™ • Q
Auto Adjust In Progress
14
Dell 1907FPc